We're sure you'll find something you like on this list. Everything on the list was independently chosen by our editors, and some of it was sent to us as samples to try out. But all of the opinions in this article are our own. And by the way, if you do decide to buy something from this list, ReviewsWhiz may get a share of the sales. So have fun finding something valuable and special!
For many of us, entering and exiting the shower can be one of the most dangerous activities we do every day. Slipping and falling in the shower is a leading cause of accidental death in older adults, and even young, healthy people can find themselves injured if they slip while washing up.
One way to make your shower safer is to install grab bars. Grab bars provide support and stability when getting in and out of the shower, and can help prevent falls.
Installing grab bars in your tile shower is a relatively simple project that most homeowners can do themselves.
Here's what you'll need to get the job done:
- Grab bars: Look for grab bars that are rated for use in wet areas and have suction cups or some other type of anchoring system to keep them securely in place. Avoid grab bars that have sharp edges, as these can be dangerous if you do happen to fall.
2. Drill: You'll need a drill to create the holes for your screws or anchors. Be sure to use a drill bit that is the correct size for your chosen screws or anchors.
3. Screws or anchors: Depending on the type of grab bar you choose, you may need screws or wall anchors to secure it in place.
4. Level: A level will help you make sure your grab bar is installed correctly and is level with the ground.
5. Tape measure: Measuring twice (or even three times) will help ensure that your grab bar is installed in the correct location.
-Pencil or marker: You'll need something to mark the spot where you'll be drilling your holes.
6. Tile Saw (optional): If you're installing grab bars on tile, you may need a tile saw to cut notches into the tile so that your grab bar will fit snugly against the wall.
7. Rags (optional): If you're cutting notches into tile, it's a good idea to have rags on hand to clean up any water that may spill during the process.
Now that you have all of your materials gathered, you're ready to start installation!
Here's how it's done:
- Measure and mark the location for your grab bar using a pencil or marker. It's important to take accurate measurements so that your grab bar is installed correctly and level with the ground. Use a tape measure to determine how high off the ground you want your grab bar to be, then use a level to make sure your marks are straight.
2. When installing on tile, consider using a tile saw to cut notches into the tile at the marked locations. Make sure you wear appropriate safety gear such as gloves and eye protection when using power tools like a tile saw. Have rags handy to clean up any water spills during this process.
3. Drill pilot holes at the marked locations using a drill bit that is the same size as your chosen screws or anchors.
4. Insert screws or anchors into the pilot holes and tighten until secure. If using wall anchors, follow package instructions for proper installation techniques.
5. Hang your grab bar on the screws or anchors and secure it in place by tightening any set screws or bolts that are included with your chosen model.
-Once again, check levelness with a bubble leveler tool before fully tightening all set screws - this will help avoid crooked Grab Bars! Hand tightening should suffice here unless otherwise specified by product instructions. Markings on some models may indicate top side - be sure these are facing up.
6. Test your new grab bar by grabbing it firmly with both hands and applying pressure as if you were getting in and out of the shower - it should feel sturdy and well secured!
Grab Bars are an important addition inside any shower stall, tub/shower combo unit or even outdoors near pools as an added safety measure during inclement weather conditions. With just a few tools and supplies, anyone can easily add grab bars around their home for improved safety!
Looking for the best grab bars in tile shower? Look no further! We've reviewed the best selection of grab bars to help you stay safe in the shower. Click the link below to see our best picks, and get started on choosing the perfect grab bar for your needs. Don't wait - click the link now and see the best grab bars for a tile shower!
