We're sure you'll find something you like on this list. Everything on the list was independently chosen by our editors, and some of it was sent to us as samples to try out. But all of the opinions in this article are our own. And by the way, if you do decide to buy something from this list, ReviewsWhiz may get a share of the sales. So have fun finding something valuable and special!
Do you have a recliner that needs to be taken apart for moving or storage? Or maybe you need to replace a broken part. Whatever the reason, taking apart a recliner is not as difficult as it may seem. With a few simple tools, you can have your recliner taken apart and ready to move in no time.
Before you start, gather the following tools:
Phillips head screwdriver,
hammer, and pliers.
- Start by removing the upholstery. This will give you access to the screws that hold the chair together. To do this, first remove any nails or staples that are holding the fabric in place. If there are no nails or staples, the fabric is likely held in place with Velcro strips. Use a flathead screwdriver to pry the strips off. Once the upholstery is removed, set it aside.
2. Locate the screws that hold the back of the chair to the frame. There will be two screws on each side of the chairback. Use a Phillips head screwdriver to remove these screws and set them aside.
3. Locate the screws that hold the seat bottom in place. There will be four screws, one on each corner of the seat bottom. Use a Phillips head screwdriver to remove these screws and set them aside as well.
4. Now it’s time to remove the springs from the chair frame. The springs are what give the chair its reclining action, so they need to be taken out carefully so they can be reused later. To do this, first use a flathead screwdriver to pry off any spring clips that are holding the springs in place on the frame. Once the clips are removed, gently pull the springs out of their holes in the frame using your hands. Set them aside with the other hardware for reassembly later.
5. With all of the major components now removed, you can gently separate the back from the seat bottom. Pull them apart at an angle from each other until they come apart completely. Be careful not to lose any small pieces or hardware during this step! You should now have three main pieces: The backrest ,the seat bottom, and the frame. You can now move these pieces separately for storage or transport.
6. Lastly ,don ’t forget to re-assemble in chronological order when you're ready to do so. Put all of those tiny pieces and parts back together carefully according to how you took them apart earlier. And that's it—you did it! Your old recliner has been disassembled and is now ready to be safely stored away or transported to its new home.
Taking apart a recliner is not as difficult as it may seem—with a little time and patience anyone can do it! Just make sure to pay attention to detail and keep track of all those tiny pieces and parts so you can easily put your recliner back together again later on down the road.
Now that you know how easy it is to disassemble your old TV recliner, it's time for an upgrade! Those old springs and padding have seen better days, and the fabric is probably starting to wear thin. Not to mention, the style is probably a little dated.
It's time to replace that old piece of furniture with something new, something that will give you years of comfort and enjoyment. So click the link below to see the best tv recliners on the market. You'll be glad that you did!